norelem offers oil level indicators with added value

These oil level gauges can do more than the standard products: The new models from norelem not only show the fill level optically, but also enable a detection via a REED switch, or emit a signal when a preset temperature is exceeded. Versions that combine both functions are also available.

The oil level gauges with electronic level monitoring are equipped with a float element with a magnetic core. If, after closing the electric circuit this float drops to the preset minimum level, an electronic signal will sound. The height of the sensor can be adjusted according to inspection requirements.

With the oil level gauges with electronic temperature monitoring, when the specified temperature is reached, the sensor closes (NO) or opens (NC) the circuit depending on the model. The temperature is monitored by a temperature switch (bi-metal).

The oil level gauges can be mounted using two M12 tapped holes or with flanged nuts through two Ø12.2 mm holes. The oil level gauges are available as a short version with a mounting hole centre distance of 127 mm or as longer versions with centre distances of 300, 400 and 500 mm. The display element of the short model has a fibreglass reinforced plastic housing. The longer versions have an aluminium housing. Both versions have a plastic viewing glass that has good mechanical properties and is resistant to mineral oil, petrol, lubrications, paraffin, solutions and most chemicals.

Source: norelem Normelemente KG